How to use an impact drill: Hot topics and practical guides on the Internet in the past 10 days
Recently, as the craze for DIY home renovation and decoration continues to heat up, "how to use an impact drill" has become one of the hot topics with soaring search volume across the Internet. This article will combine the hot content of the past 10 days to provide you with structured data and detailed operating guidelines to help you use impact drills safely and efficiently.
1. Statistics of hot topics across the entire network (last 10 days)
| Ranking | Related topics | Search volume (10,000) | Main platform |
|---|---|---|---|
| 1 | Impact Drill Buying Guide | 28.5 | E-commerce/short video |
| 2 | Impact drill safety operation | 19.2 | knowledge community |
| 3 | Tile drilling tips | 15.8 | Video platform |
| 4 | The difference between impact drill and electric drill | 12.4 | Q&A platform |
| 5 | Concrete wall drilling | 9.7 | Decoration Forum |
2. Basic operating steps of impact drilling
1.Preparation: Check whether the power cord is intact, confirm that the drill bit and chuck specifications match, and wear goggles and a dust mask.
2.Install drill bit: Rotate the chuck jacket counterclockwise, insert the drill bit and tighten it clockwise to ensure that the drill bit does not shake.
3.Mode selection: Ordinary drilling uses the rotation mode (marked by the drill bit icon), and hard materials such as concrete need to switch to the impact mode (hammer icon).
4.Operation skills: Keep the drill body vertical to the working surface, start drilling at a low speed and gradually accelerate after stabilizing, and exit regularly to remove debris.
3. Reference for operating parameters of different materials
| Material type | Recommended drill bits | Speed (RPM) | pressure control |
|---|---|---|---|
| wood | Ordinary twist drill | 1500-2000 | Press lightly |
| metal | High speed steel drill bit | 800-1200 | medium pressure |
| tiles | diamond drill bits | 500-800 | No impact/light pressure |
| concrete | Carbide drill bit | 300-600 | Impact mode/heavy pressure |
4. Answers to recent hot questions
1.Why do tiles always crack?: The number of searches for this question has increased by 120% in the past seven days. Solution: Use a special glass drill bit to open the hole first, turn off the impact function, and apply tape to reduce slippage when drilling at low speed.
2.Recommended brands of household impact drills: According to e-commerce platform data, three brands, Delixi, Dongcheng and Bosch, account for 65% of recent sales, among which the 800-1200W models are the most popular.
3.Emergency handling: When the drill bit gets stuck, turn off the power immediately, rotate the drill bit in reverse direction, and take out the drill bit. Do not pull by force.
5. Safety precautions
• Check whether the circuit is well grounded before working
• Make sure the workpiece is securely fixed during operation
• Shut down regularly to prevent motor overheating (continuous operation shall not exceed 15 minutes)
• Double insulated models should be used in humid environments
6. Maintenance points
| parts | Maintenance cycle | method |
|---|---|---|
| carbon brush | 50 hours | Check the degree of wear, the remaining 5mm needs to be replaced |
| gearbox | half a year | Add special grease |
| chuck | monthly | After cleaning, add anti-rust oil |
| vents | weekly | Use an air gun to remove dust |
Through the above structured data and operation guide, you can not only master the correct use of impact drills, but also understand the current market hot spots and the issues that users are most concerned about. It is recommended that novices practice with soft materials first and gradually master the drilling skills of different materials.
check the details
check the details
en
