Welcome to visit Gendan!
Current location:front page >> mechanical

What to do if the central air conditioner is noisy

2025-11-29 04:46:28 mechanical

What to do if the central air conditioner is noisy

Central air conditioning is a common cooling and heating equipment in modern homes and offices, but sometimes excessive operating noise can affect the quality of life and work. This article will analyze the reasons why central air conditioners are noisy and provide solutions to help you solve the problem quickly.

1. Common causes of loud noise in central air conditioners

What to do if the central air conditioner is noisy

Cause classificationSpecific performancePossible noise decibels caused by
Installation issuesThe bracket is unstable and the pipe is not firmly fixed.50-70dB
Equipment agingFan bearings wear and compressor performance decreases60-80dB
Filter cloggedPoor airflow leads to increased fan load45-65dB
Refrigerant issuesToo much or too little causes abnormal sound55-75dB

2. Practical methods to solve the problem of high noise in central air conditioners

1. Check the installation stability

If the brackets or pipes are not firmly fixed when the air conditioner is installed, resonance noise will occur during operation. It is recommended to contact a professional installer for re-reinforcement to ensure that all components are installed in place.

2. Regular cleaning and maintenance

maintenance itemsRecommended frequencyEffect
Filter cleaning1 time per monthReduce 5-15dB
Fan cleaning1 time per quarterReduce 10-20dB
Condenser cleaning1 time per yearReduce 8-15dB

3. Replace aging parts

For central air conditioners that have been used for more than 8 years, it is recommended to check core components such as the compressor and fan motor. Replacing worn parts can significantly reduce noise and improve operating efficiency.

4. Adjust operating mode

At night, you can use "silent mode" or adjust the temperature setting appropriately (around 26°C), so that the compressor will not start and stop frequently, which can effectively reduce noise.

5. Professional noise reduction processing

For particularly severe noise problems, consider:

  • Install silencer
  • Add sound insulation cotton
  • Replace the fan with a low-noise model

3. Noise reference values of central air conditioners of different brands

brandIndoor unit noise (dB)Outdoor unit noise (dB)
Daikin19-3845-55
Gree22-4248-58
Beautiful20-4046-56
Haier21-4147-57

4. When does it require professional maintenance?

If the following situations occur, it is recommended to contact professional maintenance personnel immediately:

  • Sudden increase in noise accompanied by abnormal vibration
  • Making a metallic rubbing or banging sound
  • There is a burning smell when running
  • Cooling and heating effects are significantly reduced

5. Suggestions on preventing central air conditioning noise

1. When purchasing, choose a low-noise model and pay attention to the nominal noise value of the product.

2. Ensure that the installation team is professional and reliable, and test the noise of each gear after installation.

3. Establish a regular maintenance plan. It is recommended to perform professional maintenance at least once a year.

4. Pay attention to the usage environment and avoid the outdoor unit being surrounded by debris that affects heat dissipation.

Through the above methods, most central air conditioning noise problems can be effectively solved. If the problem persists, it is recommended to contact the manufacturer's after-sales service or a professional air conditioning repair agency for detailed inspection.

Next article
  • What is CT current?In the field of power systems and electronic measurement,CT current(Current Transformer, current transformer) is a device used to measure alternating current. It converts high current into low current through the principle of electromagnetic induction, which facilitates safe measurement and monitoring. This article will combine the hot topics on the Internet in the past 10 days to give a structured
    2026-01-25 mechanical
  • What does overshoot mean?In the field of control engineering and automation,OvershootIt is a very important concept, which describes the phenomenon that the output exceeds the steady-state value during the system response process. This article will explain in detail the definition of overshoot, its calculation method, and its significance in practical applications.1. Definition of overshootOvershoot refers to the per
    2026-01-22 mechanical
  • What is a flange gland?In the industrial field, flange glands are a common sealing component and are widely used in the connection and sealing of pipelines, valves, pumps and other equipment. Its main function is to prevent fluid leakage and ensure the safe operation of the system. This article will introduce in detail the definition, structure, application scenarios of flange glands, as well as hot topics and hot co
    2026-01-20 mechanical
  • What does sulfur dioxide do?Sulfur dioxide (SO₂) is a common chemical substance widely used in industry, food, medicine and other fields. Although it has certain toxicity, when used rationally, sulfur dioxide plays an irreplaceable role. The following is a summary of the main functions of sulfur dioxide and related hot topics.1. Industrial applications of sulfur dioxideSulfur dioxide is mainly used in industry to m
    2026-01-17 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line