Welcome to visit Gendan!
Current location:front page >> mechanical

How to choose the number of air conditioners

2026-01-03 02:45:26 mechanical

How to choose the number of air conditioners? Analysis of hot topics on the Internet in the past 10 days

As the high temperature in summer continues, the purchase of air conditioners has become one of the hot topics on the Internet recently. Among them, "how to choose the number of air conditioners" is the focus of consumers' attention. This article will provide you with a structured guide based on popular discussions and data analysis in the past 10 days.

1. What is the number of air conditioners?

How to choose the number of air conditioners

Air conditioner horsepower (HP) is a unit that represents the cooling capacity of the air conditioner. One HP is approximately equal to 2500W of cooling capacity. The larger the number of horses, the stronger the cooling capacity and the larger the suitable area.

Number of piecesRefrigeration capacity(W)Applicable area (㎡)
1 horse2200-260010-15
1.5 horses3200-360016-25
2 horses4500-550025-35
3 horses6500-750035-50

2. Hot topics of discussion in the past 10 days

According to data analysis on social media and e-commerce platforms, consumers are mainly concerned about the following issues:

RankingHot topicsDiscussion popularity
1Selection of number of air conditioners for small apartments85%
2Differences in the number of units between variable frequency and fixed frequency air conditioners72%
3Number of units required for Western rooms68%
4Selection of number of air conditioners for high floors55%

3. Five key factors when choosing the number of air conditioners

1.Room area: This is the most basic selection basis. Please refer to the applicable area in the table above.

2.room orientation: It is recommended to choose an air conditioner that is 0.5 HP larger than the conventional one for a western-sun room.

3.Floor height factor: For rooms with a floor height of more than 3 meters, it is recommended to add 0.5 horses for every 0.5 meter increase.

4.Number of residents: For every additional person, it is recommended to consider increasing the cooling capacity by 0.1-0.2 horsepower.

5.special needs: If rapid cooling is required, it is recommended to choose an air conditioner that is 0.5 HP larger than the conventional one.

4. Proportion of hot-selling air conditioners in 2023

Number of piecesSales proportionAverage price (yuan)
1 horse25%2200-2800
1.5 horses45%2800-3500
2 horses20%4000-5500
3 horses and above10%6000-12000

5. Expert purchasing advice

1.The principle of preferring big to small: If the budget allows, choosing an air conditioner with a slightly larger horsepower can provide a better experience.

2.Focus on energy efficiency ratio: When the number of horses is the same, choosing a model with a higher energy efficiency ratio will save more power.

3.Brand differences: The actual cooling effect of air conditioners with the same number of units from different brands may be different. It is recommended to refer to actual measured data.

4.Installation impact: The quality of installation directly affects the performance of the air conditioner. It is recommended to choose regular installation services.

6. Analysis of common misunderstandings

1.The bigger the number, the better?: Wrong. Excessively large number of horses will lead to frequent starts and stops, which consumes power and affects comfort.

2.Can I choose a smaller number of units for an inverter air conditioner?: Not entirely correct. Although the inverter air conditioner has stronger adjustment capabilities, the basic number of units still needs to match the room requirements.

3.Same performance with the same number of pieces?: The actual cooling effects of air conditioners with the same number of units of different brands and models may be significantly different.

Through the above structured data analysis, I believe you already have a clear understanding of how to choose the number of air conditioners. When making specific purchases, it is recommended to choose the most suitable air conditioning product based on your room characteristics and budget.

Next article
  • What is CT current?In the field of power systems and electronic measurement,CT current(Current Transformer, current transformer) is a device used to measure alternating current. It converts high current into low current through the principle of electromagnetic induction, which facilitates safe measurement and monitoring. This article will combine the hot topics on the Internet in the past 10 days to give a structured
    2026-01-25 mechanical
  • What does overshoot mean?In the field of control engineering and automation,OvershootIt is a very important concept, which describes the phenomenon that the output exceeds the steady-state value during the system response process. This article will explain in detail the definition of overshoot, its calculation method, and its significance in practical applications.1. Definition of overshootOvershoot refers to the per
    2026-01-22 mechanical
  • What is a flange gland?In the industrial field, flange glands are a common sealing component and are widely used in the connection and sealing of pipelines, valves, pumps and other equipment. Its main function is to prevent fluid leakage and ensure the safe operation of the system. This article will introduce in detail the definition, structure, application scenarios of flange glands, as well as hot topics and hot co
    2026-01-20 mechanical
  • What does sulfur dioxide do?Sulfur dioxide (SO₂) is a common chemical substance widely used in industry, food, medicine and other fields. Although it has certain toxicity, when used rationally, sulfur dioxide plays an irreplaceable role. The following is a summary of the main functions of sulfur dioxide and related hot topics.1. Industrial applications of sulfur dioxideSulfur dioxide is mainly used in industry to m
    2026-01-17 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line