How to replace the reversing light bulb
In daily cars, reversing light bulbs are an important part of vehicle safety. If the reversing light bulb is damaged, it will not only affect the reversing visibility at night, but may also violate traffic regulations. This article will introduce in detail how to replace the reversing light bulb, with relevant data and precautions.
1. Steps to replace the reversing light bulb
1.Preparation: First make sure the vehicle is turned off and the key is removed. Prepare new reversing light bulbs (which must match the car model) and tools (such as screwdrivers, gloves, etc.).
2.Find the location of the light bulb: The reversing light bulb is usually located in the taillight assembly at the rear of the car. Open the trunk and find the cover on the back of the taillight.
3.Remove the taillight cover: Use a screwdriver or bare hands to unscrew the screws or buckles that fix the cover, and gently remove the cover.
4.Take out the old light bulb: Locate the reversing bulb socket, turn it counterclockwise and pull out the old bulb. Be careful not to use excessive force to avoid damaging the socket.
5.Install new light bulbs: Insert the new bulb into the socket and turn it clockwise to secure it. Make sure the bulb is installed securely to avoid poor contact.
6.test light bulb: Restart the vehicle, shift into reverse gear, and check whether the new bulb is working properly.
7.Restoration cover: After confirming that the bulb is working properly, reinstall and secure the cover.
2. Reference for reversing light bulb models of common car models
| car model | Bulb model | Power (W) |
|---|---|---|
| Toyota Corolla | T15 | 16 |
| Honda Civic | T20 | 21 |
| Volkswagen Golf | W16W | 16 |
| Nissan Sylphy | T15 | 16 |
3. Precautions
1.Safety first: When replacing the light bulb, be sure to turn off the vehicle to avoid electric shock or short circuit.
2.bulb matching: Different models of reversing light bulbs may have different models, so please confirm suitability before purchasing.
3.Avoid direct contact with the bulb: It is recommended to wear gloves when installing to prevent the oil on your hands from affecting the life of the bulb.
4.Check circuit: If the bulb still does not light up after replacement, it may be a circuit or fuse problem that requires further inspection.
4. Hot topics and content on the entire network in the past 10 days
Recently, car maintenance and DIY repair have become one of the hot topics. The following is the most popular content related to automobiles in the past 10 days:
| topic | heat index | Main discussion points |
|---|---|---|
| New energy vehicle maintenance | ★★★★★ | Battery maintenance and charging tips |
| DIY car light bulb replacement | ★★★★☆ | Reverse light and headlight replacement tutorial |
| Summer tire options | ★★★☆☆ | Recommended run-flat tires and silent tires |
| Vehicle-mounted smart devices | ★★★☆☆ | Driving recorder, navigation system |
5. Summary
Replacing the reversing light bulb is a simple DIY operation that can be completed by following the steps carefully. With the guidance in this article, you can easily solve the problem of a damaged reversing light bulb. At the same time, paying attention to popular car topics can also help you learn more about car use.
check the details
check the details
en
